The hydraulic graphite electrode FOR EAF is equipped with plastic steel and plexiglass dust-proof devices (requiring beautiful appearance, sealing, air inlets, and coordination with the kiln body). Optional printer. 6. 6.5 yard height: ≤210mm, load per plate ≤18.8 In the control cabinet, heat dissipation adopts a ventilating fan with a screen, shutters are used as the air intake channel on the bottom side of the control cabinet, and a lighting device is installed in the cabinet. 5.9
There are two adjustable chimneys in the furnace temperature rising section of 300 ℃ ~ 700 ℃, the colloid and harmful gases are discharged to the outside, and the effluent is ignited by ignition to minimize environmental pollution. 9.1 Furnace size: 25000 × 720 × 270 (including the thickness of the push plate) (L × W × H) mm (double push plate).6 Carbon rod terminal cavity is sealed with silicon rubber mud, and terminal posts are ceramic insulated posts. Replacement chambers are set at the front and back of the furnace body, and products enter and exit the furnace chamber through the replacement chamber to ensure the tightness of the furnace mouth.1 Computer monitoring system 6.
The silicon carbon rod joint is compressed by a clamp and sealed with a jacket. The furnace structure is stable, the furnace temperature and atmosphere are uniform, energy saving and durable, and the structure design is reasonable.3Mpa.10 Propulsion speed: 600-2500mm / h.1 Product material: powder material. 5.5 In order to prevent the exhaust gas from corroding the heating rod, the heating rod needs to be protected by a ceramic tube.2 Power supply capacity is greater than 260KVA. The main thrust speed is 500-2800mm / h, stepless adjustment Speed; system rated pressure 6.2 The temperature control instrument adopts digital display intelligent instrument. 6.3 Software: It adopts the secondary development system of Beijing Kunlun Tongzhou Configuration Software, with rich and beautiful control interface.
Uses It is used for the firing of graphite anode materials.5 The control cabinet panel is equipped with a main power switch, voltmeter, ammeter, intelligent digital display temperature control instrument, switch, button, indicator, etc. 6.3 Temperature control mode: Phase shift triggering using thyristor module, 0 ~ 98% power output can be adjusted. Requirements for power source and installation conditions of the equipment 8. 4.10
https://www.china-graphiteelectrode.com/product/graphite-electrode/
There are two adjustable chimneys in the furnace temperature rising section of 300 ℃ ~ 700 ℃, the colloid and harmful gases are discharged to the outside, and the effluent is ignited by ignition to minimize environmental pollution. 9.1 Furnace size: 25000 × 720 × 270 (including the thickness of the push plate) (L × W × H) mm (double push plate).6 Carbon rod terminal cavity is sealed with silicon rubber mud, and terminal posts are ceramic insulated posts. Replacement chambers are set at the front and back of the furnace body, and products enter and exit the furnace chamber through the replacement chamber to ensure the tightness of the furnace mouth.1 Computer monitoring system 6.
The silicon carbon rod joint is compressed by a clamp and sealed with a jacket. The furnace structure is stable, the furnace temperature and atmosphere are uniform, energy saving and durable, and the structure design is reasonable.3Mpa.10 Propulsion speed: 600-2500mm / h.1 Product material: powder material. 5.5 In order to prevent the exhaust gas from corroding the heating rod, the heating rod needs to be protected by a ceramic tube.2 Power supply capacity is greater than 260KVA. The main thrust speed is 500-2800mm / h, stepless adjustment Speed; system rated pressure 6.2 The temperature control instrument adopts digital display intelligent instrument. 6.3 Software: It adopts the secondary development system of Beijing Kunlun Tongzhou Configuration Software, with rich and beautiful control interface.
Uses It is used for the firing of graphite anode materials.5 The control cabinet panel is equipped with a main power switch, voltmeter, ammeter, intelligent digital display temperature control instrument, switch, button, indicator, etc. 6.3 Temperature control mode: Phase shift triggering using thyristor module, 0 ~ 98% power output can be adjusted. Requirements for power source and installation conditions of the equipment 8. 4.10
https://www.china-graphiteelectrode.com/product/graphite-electrode/
コメント